LEFEET P1 | Versatile Water Scooter With Modular Design

Beware, the batteries have to be changed in a dry environment.

If you change the batteries during diving, the device will be damaged.

The motor power will be limited to 500W for the 100Wh battery; running at the highest speed lasts about 30 minutes. You can get the most extended battery life at the lowest speed.

On the other hand, the motor power activates up to 1000W for the 160Wh battery. The speed and battery life will increase accordingly, depending on the environment, flow velocity, load, etc.

The surface speed of SUP is about 10km/h.

But it may vary according to the size of SUP and load carrying, etc.

We've updated the trigger system to make a gradual and controlled acceleration to the maximum selected speed.

P1 weighs 2.4kg (5lb), and the negative buoyancy in fresh water is about 1.3kg (2lb).

P1 XR weighs 3.2kg (7lb), and the negative buoyancy in fresh water is about 1.4kg (3lb).

When choosing the 100Wh dual battery option, the maximum speed is 2.7 m/s.

On the other hand, with the 160Wh dual battery option, the maximum speed increases to 3 m/s.

Please notice that these speeds have been tested with an 80kg person and should be considered as reference values.

Actual speeds may vary depending on different factors and situations.

The P1 with 100wh battery and the P1 XR with 160wh battery both share the same motor unit, so either battery is interchangable with motor body.

FAA and IATA allow less than 100wh battery without hesitation.

A 160wh battery is also approved, but airlines are given the discretion to restict.

In our experience, almost all airlines allow the 160wh, but our suggestion is to always check with your specific airline before travel.

LEFEET P1 come with an upgraded quick assemble system, which is specifically tailored for the P1 model.

The new accessories are not compatible with older models such as the S1 PRO and C1.

It is recommended to use the Remote Control Extension Kit accompanied by the SUP mount, Leg Mount Kit, and Tank Mount Kit. It provides long-distance control over P1.

The tank mount has the capacity to accommodate either one or two P1 units in parallel, and it is fully compatible with the 160Wh battery as well.

You can use the standard sports camera mount in the package to mount a torch with a universal camera plate.

This mount can also be easily DIY'd to mount torches with other unique interfaces.

Each SUP Mount will have a pedestal (an adapter) to help you attach a P1 beneath the paddle board.

You can even install more than one P1 under it with multiple SUP Mounts.

Please take this short video as a reference: https://www.youtube.com/watch?v=D8i_B6qnvyo

To maintain optimal performance, please follow these steps for maintenance after each use:

STEP 1: Immerse the LEFEET P1 (ensuring it is securely fastened with the main unit and the battery*) in a container filled with clean fresh water (not seawater) for 30 minutes.

STEP 2: Hold the handles with both hands, switch it on at a slow speed for one minute, and repeat this process 2-3 times while the product is fully submerged in water.

STEP 3: Dry the main unit with a soft, clean, dry cloth.

STEP 4: Loosen the ring connecting the battery and main unit with dry hands, and remove the battery.

STEP 5: Allow the main unit and battery to dry completely in a cool, ventilated area.

*Securely fastened means that you will be able to pair it with the remote control and not showing loose connection

The P1 Dual Set includes two sets of P1 water scooters and one dual rail kit. This setup allows you to use the water scooters individually as two single setups or combine them as a dual setup, providing flexibility for your needs.